Low Temperature Industrial Cooling Air Cooled Glycol Water Chiller

Product Description

                            HYC Air Cooled Water Chillers Engineered for Lowest Cost.
                                                    Tailor your chiller to meet your specific needs.
                              Achieve efficient operation across all cooling-load and ambient temperature conditions.


DC Inverter Air Cooled Water Chiller
DC Inverter air cooled water chillers refers to the inverrter compressor.The most common types of compressors are the fixed speed compressor. The fixed speed will run at 100% of its capacity and will stop and start automatically to  maintain the desired temperature. An inverter compressor will vary its speed in order to maintain a consistent temperature. They convert the AC power into DC to all the control of the outdoor unit compressor speed. This gives the unit better accuracy to provide a constant temperature and less energy wastage.
Comparison with non-frequency conversion Air Cooled Chiller:

More comfortable
With a wider range of temperatures modes for heating and cooling,the inverter is able to operate in even the most extreme outdoor temperatures.An inverter compressor can also operate faster than non-inverter air conditioners thus allowing the air conditioners to reach the set temperature faster and bring you comfort sooner.

More Comfortable
When the air conditioner is initially activated to either heat or cool,the compressor will operate at maximum speed to reach the desired temperature is achieved,unlike non-inverter air conditioners that turn the compressor on and off,inverter units adjust and constantly vary the compressor speed to maintain the desired temperature with minimal fluctuation to ensure that your comfort is not compromised.

More Energy-efficient
Compressor and motor speed in non-inverter type air conditioners remains constant and temperature is adjusted by turning the compressor and more ON and OFF,which consumes more energy.In inverter type air conditioners,temperature is adjusted by changing compressor frequency/motor speed without turning them ON and OFF.Therefor,the power loss of the inverter air conditioner is smaller,with can increase energy efficiency by about 35%.

More Economics
All inverter systems are engineered and manufactured,ensuring performance.reliability,and efficiency.The increased efficiency and operation of our inverter systems reduce the wear tear on the compressor,contributing to durability and longevity of the system.

FEATURES
CAPACITY RANGE
Capacity ranging from 2.5Ton to 640Ton
Cooling performance: -5~50ºC
Heating performance: -25~24ºC
It is supplied as a complete package ready for operation, with no extra controls or other items to be installed. The units have a single power point entry with simple connections.
Quick start-up is assured once installation is completed, as each units is manufactured in an ISO9001:2000 listed facility to guarantee quality. All units are tested at the factory to provide reliable start up.
HIGHLY QUALITY COMPONENTS AND RELIABLE PERFORMANCE
DC inverter type compressor and high quality world known brand cooling parts, which ensures units' reliable performance.

STRUCTURE
The master module can work independently or together with up to 11 slave modules.

HERMETIC COMPRESSOR
The units use high efficiency, hermetically sealed, compressors, oil return lubrication and rubber vibration
damper. The thermal overload cut-out, phase sequence relay and crankcase heater are integrated as the security
protection to enhance reliability and performance.

AXIAL FAN
External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level
IP55, provided with a protective outlet grille.

EVAPORATOR
Evaporator built with high efficiency plate type heat exchanger, factory insulated with flexible close cell material.

CONDENSER
Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins.

HYDRAULIC CIRCUIT
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.

ELECTRIC PANEL
Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit) Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.

OPTIONAL
• Flow switch;
• Rubber anti-vibration mounting..
• Compressor soft connection
• BMS
• Stainless steel covering
• Heat recovery 20%-25%
• Remote condenser

	Model		20	30	40
	Power supply	V-Ph-Hz	380v/3ph/50hz	380v/3ph/50hz	380v/3ph/50hz
Cooling*
	cooling capacity	KW	65	97.5	130
	cooling power input	KW	20.8	31.2	41.6
	cooling current input	A	38.50	55.8	74.3
Heating**
	heating capacity	KW	68	103	141
	heating power input	KW	21.5	32.25	43
	heating current input	A	38.4	57.6	76.8
Compressor
	qty	/	2	3	4
	input power	kW	10.1*2	10.1*3	10.1*4
	input current	A	17.6*2	17.6*3	17.6*4
Condensor
	condensor coil qty	/	3	4	5
	air flow	m3/h	12700*2	17800*2	23800*2
	axial fan qty	/	2	2	2
	motor power input	KW	0.75*2	1.1*2	1.5*2
Evaporator
	type	/	shell and tube	shell and tube	shell and tube
	water flow	m3/h	11.2	16.8	22.4
	water pressure drop	kPa	38	38	38
	water pipe	mm	DN50	DN50	DN50
	Noise level	dB(A)	60	74	78
	Dimension(L*W*H)	mm	2020*1000*1920	2020*1000*1920	2020*1000*1920
	Net weight	kg	605	830	925

Qingdao Hongyu Cles Air Conditioning Co., Ltd.
Hongyu cles air conditioning(HYC) are dedicated to providing market leading innovations and new technologies that are easy-to-use solutions with the goal to always offer our client reduced energy outlay whilst empowering complete control to customize the solution for their business.

Air Cooled Water Chiller Production Line

Production Machinery

Test Lab

Sincerely welcome to visit our factory at your convience. Customer could witness their order production real conditions by online videos or photos at any time during production.